Sunday, June 3, 2012

Making Your Own PCB – pitfalls and overcoming them

Making Your Own PCB – pitfalls and overcoming them:

If you start tinkering with electronics, eventually you will want to make your own printed circuit board. In the olden days you could just buy an etching kit at your local radio shack. Now, most electronic projects are much more complex, the boards are much smaller, and you need to deal with 2 layers, surface mount components and vias. Rather than being just another PCB tutorial, this extensive two part overview covers the myriad of problems you may encounter and the methods available for solving these problems.
Making Your Own PCB – pitfalls and overcoming them - [Part1]+[Part2]

No comments:

Post a Comment